Show whole topic
Oct 30, 2013 8:24 pm
Oct 30, 2013 8:24 pm
Subject: Re: Rocker pin survival rate!
Put the valve at full lift, and arrange a suitable leaver to
open the valve further. If you have a dial gauge and a base
to mount it with, set the gauge on the top cap, set to zero
and lever the valve open, take a reading. You need at least
.050" more. If you have a high lift cam allso check for valve
spring coil bind.
Ray Sherratt
Put the valve at full lift, and arrange a suitable leaver to
open the valve further. If you have a dial gauge and a base
to mount it with, set the gauge on the top cap, set to zero
and lever the valve open, take a reading. You need at least
.050" more. If you have a high lift cam allso check for valve
spring coil bind.
Ray Sherratt